Five steps for prepping wood siding for painting

August 17, 2015

The secret to a successful house-painting job is proper preparation. Usually that involves using a pressure washer to clean your house's exterior (whether it's wood siding or not). Here are five steps for prepping your wood siding for painting.

Five steps for prepping wood siding for painting

What you will need

  • High-pressure washer or garden hose
  • Dishwashing detergent and bleach
  • Long-handled scraper
  • Dust mask
  • Electric sander
  • Extra-coarse and medium-grade sandpapers
  • Awl
  • Brush
  • Oil or acrylic primer
  • Paintable sealant
  • Wood preservative
  • Chisel (if required)
  • Wood hardener (if required)
  • Epoxy wood filler (if required)

1. Wash the walls

  • If your home's exterior is in good condition, simply wash it down with a garden hose.
  • If the exterior is dirty and the paint is peeling, use a high-pressure washer, taking care not to let water shoot up between the boards.
  • You should remove spots of mildew with a solution of dishwashing detergent and bleach.

2. Smooth the surface

  • If areas of loose paint remain after washing, remove them with a long-handled scraper.
  • Then, wearing a high-quality dust mask, use your electric sander to feather the edges or smooth any cracked or crazed paint.
  • Start with an extra-coarse grade of sandpaper and move to a medium grade.

3. Stop the rot

  • Check for rotting wood, especially along any trim.
  • If you find any soft wood, insert your awl to measure the depth.
  • If the damage is shallow, simply sand it off.
  • For deeper areas of rot, hollow them out out with a chisel, treat them with a wood hardener, and then patch them with an epoxy wood filler after the hardener has dried.

4. Repair the seals

  • Remove crumbling sealant around doors and windows with the corner of your scraper.
  • Sand the edges and then brush them down to clear out any dust or paint particles.
  • Prime the timber then fill the exposed gaps with a paintable sealant.

5. Prepare to paint

  • Work your way around your house's exterior, applying a wood preservative to any potential problem areas.
  • Next, apply primer to all bare wood and all newly sanded areas.
  • Make sure your primer is a good match for your selected paint.
  • Paint within two weeks of priming.

Follow these five steps for preparing your house's exterior for painting, and you'll have set yourself up for a successful house-painting.

The material on this website is provided for entertainment, informational and educational purposes only and should never act as a substitute to the advice of an applicable professional. Use of this website is subject to our terms of use and privacy policy.
Close menu